Panther S-TYPE 3 Series, Руководство пользователя

Страница: 31 / 35

60 61
ACCESSORIES
BUMPER
When the strip is sticked on, take a cutter
and make small slits into the velcro fastener
(only where the carbon cover has holes for the
screws).
After cutting you can put the screws to the
upper side.
Repeat all steps for the bottom side. Attach the bumper to the required position
along the backside of the dolly.
TRANSPORT
REMOVE THE SCISSORS-ARM
The two Carrying Rods differ in one thing: one
comes with additional holders. This one is for
the backside of the arm.
Take this one and mount it on the top side
of the scissors-arm by turning the integrated
knobs clockwise.
!
Attention
Make sure you do not confuse the two Carrying Rods. Otherwise the
mechanical components are unnecessarily stressed.
Remove the Scissors-Arm
Removing the arm facilitates easier
transport. There are Carrying Rods (310120)
available to take the arm out.