Panther S-TYPE 3 Series, Руководство пользователя

Страница: 15 / 35

28 29
will light up when
the dolly is turned on
is blinking if a
minimum limit is
active.
is blinking if a maximum limit is active. It will light up when
batteries are empty or in case of an error.
Control LEDs:
Red, yellow and green LED will light up
for 2 sec. if dolly is switched on.
Power: yellow LED
green LED
Battery
empty/error: red LED
Power socket
see page 10/11
Antenna
Antenna can be changed into a longer one
for more distance reach
CONTROL PANELS
CONTROL LEDS
BLUETOOTH HANDSET
SUPER LOW MODE
Super Low Mode
In order to use the full range of the scissors arm,
we developed the patented full range technology.
This allows the scissors-arm to move the same
way up as down into the negative.
To prevent crashing the floor with the scissors-
arm by mistake you have to activate the Super
Low Mode in the Settings Menu when it is needed.
Attention
If the Super Low Mode is
activated, please operate
very carefully, because it will
run below it‘s ground level
position.
Make sure the way for the
Scissors-Arm is completely free
and that you don‘t damage the
Scissors-Arm or the floor.
The maximum load capacity
of dolly change in this mode to
30kg/65lbs.
How to activate the Super Low Mode
To activate the Super Low Mode navigate to
Menu Super Low.
In this mode your Position Bar can move from 100
to -100.
!