Panther S-TYPE 3 Series, Руководство пользователя

Страница: 7 / 35

12 13
PREPARING
POWER SUPPLY
Charging the Bluetooth Handset
The Bluetooth Handset can be chargen in two
different ways: regularly via mains power or
by cable connection to the dolly.
Regular Charging
To charge the Bluetooth Handset you can use
the standard charging cable (310848) and
plug it into a wall socket.
The Display will show „charge“.
Charging via Dolly connection
Despite charging the Bluetooth Handset on the wall socket you can connect it directly to your
dolly. Everytime you have a wired connection from the handset to the dolly, the handset will
be charged.
!
Attention
Please note, that if your Bluetooth Handset is connected to the S-Type via
cable the power will be taken from the dolly batteries, which decreases the
battery capacity of your dolly.
Step 1:
Connect the Panther S-Type Dolly batteries as described in „Power Supply“.
Step 2:
The Panther S-Types’s (and accessories) complete lift, panning and movement range must be
cleared before switching on the dolly.
Step 3:
Connect the Bluetooth Handset via cable to the dolly.
Step 4:
Switch the dolly on at the red main switch. Then turn on the „On/Off“ button at the Bluetooth
Handset.
INITIAL OPERATION
!
The Panther S-Type Dolly may only be operated with the original Panther
batteries. Although the batteries left our warehouse fully charged, it is
possible that a long transit time/low temperatures caused the batteries
to empty. Please check this before operation.Fully charge the batteries
before first use.
SPEED 1
RAMP Soft
BATTERY HANDSET charge
BATTERY DOLLY 80%
Menu Speed Ramp Limit PRG
37