11
Bridge installation and configuration guide
January 2018
© 2018 Centrica plc. Registered office: Millstream, Maidenhead Road, Windsor, Berkshire. SL4 5GD.
Registered in England & Wales No 3033654
•
For wi-fi and ethernet connections, verify that the system administrator has opened port
8051 for inbound/outbound TCP/IP traffic. In addition, verify that DHCP & DNS ports are
open (67/68, 53).
How to Proceed
1.
In
Connection Type
select
Connect via Wi-Fi
.
2.
To let the system find the
SSID
(network name) and
Security
(encryption method used), click
Find
networks
.
Otherwise, enter these values manually.
The display shows a list of networks in your vicinity.
Note
If the expected wi-fi network was not found, or if no network was found at all, you can click the
Find
Networks
button again to reattempt to search for networks.
3.
Select the network you want to use and click
Apply
. If the network supports a mixed encryption mode,
the WPA available notice appears on the screen.
4.
For Open, WEP, and WPA security, enter the password in the field highlighted in the screen above.
5.
For enterprise WPA and enterprise WPA2 security, enter your password in the field shown below (this is
for use with RADIUS server authentication).
