27
there are no proper tools, please do not dissemble it without permission; if you really
need the disassembly, please contact us.
f) After a period of operation (a month later), you need to apply lubricating grease on
the motion section.
(
Ⅵ
) Precautions for printing materials:
a) During printing, please ensure that the supplies is able to rotate smoothly. The
smaller the resistance is, the better.
b) It would be best not to open the supplies before use. For the opened supplies that
would not be put in use for a long time, you had better store it without light and air.
Whether opened or unopened, supplies should be stored under the environment which
avoids direct sunlight, and keeps away from dust and moisture.
c) For the storage of opened supplies, you should pay attention to fixing head of
supplies to prevent loose supplies to tie knots during printing.
(VII) Precautions for the use of other accessories:
a) The machine packing box, plastic foam and other internal parts that you have
received should be preserved properly.
b) The hexagon wrench coming with the machine should be properly stored after use.
(VIII) The replacement strategies of fuse and nozzle.
a) Fuse. Firstly, three-hole power cord should be pulled down, and the device which
holds the fuse should be removed, and then the fuse should be removed and be
installed according to the original pattern.
b) Firstly, loosen the nut next to the printing head, remove the heating rod and
thermocouple, and then use the hexagon socket loosen the nut above the printing head,
down. Then, pull out the print head downward (due to thermal expansion and
contraction principle, considerable force is required to pull it down). Finally, reload a
new printing head in accordance with the original manner.
