14
In the Figure above, we are observing the condition of the 58th floor. As shown in
Figure, the outermost part in red represents the shell of model. The following green
part remains one section of the shell, but it is not directly exposed. The middle part in
yellow is filling, which is used to constitute the central part of solid object. Armed
with this information, 3D printing plan of each layer which is planned out after the
Cura slicing can be understood more properly and intuitively. If the problem occurs, it
can be easily positioned and solved.
After the model is loaded, 3D image of loaded model can be seen immediately in the
main window. Meanwhile, at the location marked with a red box at the upper-left
corner of the window, you can see a progress bar is on the move. Soon, when the
progress bar reaches 100%, time, length, and gram can be displayed and the save
button (Save Gcode) becomes available. As shown in Figure:
