23
4. Restart the ChiTuSlicer software, you can see the scanned device, select the device.
After loading STL model file which needs to be printed, properly adjust the printing
parameters and select Send File option and left-click on it to send the file, or
right-click it, and finish sending Gcode, then print directly. (Attention: SD card with
enough space must be inserted into the printer when WiFi online printing)
WIFI FAQs:
Put the freshly generated gcode into SD card, insert the motherboard and print, after it
is complete, check whether IP is displayed in the machine WiFi option. Please make
sure that the WiFi module is properly inserted into the motherboard. (If IP is displayed
in the bar of SSID, it indicates that the WiFi module is properly inserted)
Make sure that the device is in the coverage of the router signal. At the location of
device, a mobile phone is at least be able to scan the router signal.
