19
nozzles, better results can be obtained. It is usually appropriate that these maintain the
default values.
Speed
is used to specify the operating speed of printer at various stages of 3D
printing.
Refrigeration
is used to control parameters of the cooling fan. It is rarely seen that
these two bars need to be modified, so it is appropriate to maintain the default value.
。
SD Model Printing
Please make sure that the SD card is inserted into the side slot, and turn on the power
switch to energize the equipment. The SD card we offer to you as the standard
equipment includes the test model. You can also add GCode model files which is
sliced by software by yourself and print it in the SD card.
Click on Print on the interface, and select the GCode file of the model which is
expected to be printed from SD card, then it starts printing automatically after the
temperature rises to required level.
