BA_PH_245-100-300_EN_06-22.docx
68
Continuation “Milling Spindles and Arbors”
Article
Description
Art.-No.
ARBOR HSK-85-
POWERLOCK, Ø 50 MM
See Art.-No. 4850, but clamping length = 160 mm.
4854
ARBOR HSK-85-
POWERLOCK, Ø 1 ¼"
See Art.-No. 4850, but clamping length = 140 mm.
4855
COLLET CHUCK
HSK-85-POWERLOCK
A-dimension = total length 100 mm with nut and hook spanner
(without collet).
4856
COLLET FOR
HSK-85-POWERLOCK
From diameter 2 - 20 mm (1 mm steps).
Please specify the diameter when ordering!
4857
20.5
Roller Table, Cross-Cut Fence and Tenoning Device
Article
Description
Art.-No.
ROLLER TABLE
With stop fixture, eccentric clamp, clamping table with insertion up to
the milling spindle. With suction nozzle Ø 120 mm, stepped height ad-
justment (upper position as roller table, lower position as table exten-
sion left). Including protective cover 1641 Art.-No. 2235).
Important
:
When ordering this option, the machine must be equipped with the
large table top (Art.-No. 4423), and possibly additionally with a table
extension on the right (Art.-No. 4217).
4491.1
CROSS-CUT FENCE LAS-M
Right-hand version for system tools to process workpieces in pairs, ef-
fective length = 1750 mm, slide system with multiple stop and 3 adjust-
ing rings for cross-cut positioning with splitter tongue.
4417
EXTENSION FOR LAS-M
Total length 1000 mm / effective length 1750 to 2750 mm
4418
TENONING AND
SLOTTING DEVICE 1376
Mounted on the machine table for light tenoning and slotting work
with eccentric clamp and adjustable mitre fence. Sliding length = 710
mm, height above table approx. 56 mm.
4547
PROTECTION COVER 1641
Protection cover for the tenoning and slotting device 1376, suitable for
tool diameters from 250 to 350 mm, with suction nozzle Ø 120 mm.
2235
20.6
Power Feeders and Consoles
Article
Description
Art.-No.
POWER FEEDER
PV 84
4 rollers 120 x 60 mm, right and left rotation, stand with extension arm
L = 1050 mm, 8 speeds: 2/4/5,6/6,7/11/13/16,5/33 m/min, can be used
individually horizontally and vertically, incl. mounting, cable and plug.
4029
POWER FEEDER
VARIOMATIC 4 N
4 rollers, infinitely variable feed speed from 2 - 18 m/min clockwise
and anti-clockwise rotation, quick turning from horizontal to vertical
use. Easy swivelling away and positioning with memory lock system.
With comfort stand, numerical height display, extension arm L = 1050
mm, incl. mounting, cable and plug.
4638
MOVABLE CONSOLE
With joint for swivelling away the power feeder, mounted on the left
side of the machine.
Mandatory for roller table Art.-No. 4491.1, mill-
ing fence types 302, 320 and integral fence plates 650 + 650 mm
.
4663
RIGID CONSOLE
For mounting a power feeder, size approx. 195 x 180 mm, mounted
laterally on the left of the table top.
Mandatory when using the mill-
ing fence types 302, 320 and integral fence plates 650 + 650 mm
with table top size 1100 x 760 mm.
4664