PANHANS Ultimo-Touch 245/100, Руководство по эксплуатации, Страница: 63 / 71

BA_PH_245-100-300_EN_06-22.docx
63
19.2 Lubrication Plan
Figure 69: Lubrication points on the machine Figure 70: Central lubrication

To keep the machine parts always clean and in perfect condition, excess and/or old grease must
be wiped off at the outlet points of all existing grease nipples and other guiding elements!
Standard Version
Pos. Lubrication Point Access Lubrication Interval / Dosage
1
Milling spindle bearing
(top)
Move the spindle all the way up and
remove the insert rings or table slider monthly / 2 grease shots
2
Milling spindle bearing
(bottom)
Open front service door monthly / 2 grease shots
3
Height adjustment bearing
(top)
Open front service door monthly / 2 grease shots
4
Height adjustment bearing
(bottom)
Open front service door monthly / 2 grease shots
5
Swivel segment guides
15
(both sides)
Access from above, before
remove insert rings / table slider
weekly / lubricate with fine oil
6
Optional HKS 63 quick tool
change system
Under the lower milling spindle
bearing (open front service door)
monthly / 2 grease shots
(wipe off excess grease)
With Central Lubrication (Option)
Pos. Lubrication Point Access Lubrication Interval / Dosage
1
Milling spindle bearing
(top)
Move the spindle all the way up and
remove the insert rings or table slider monthly / 2 grease shots
5
Swivel segment guides 15
(both sides)
Access from above, before
remove insert rings / table slider
weekly / lubricate with fine oil
6
Optional HKS 63 quick tool
change system
Under the lower milling spindle
bearing (open front service door)
monthly / 2 grease shots
(wipe off excess grease)
Grease gun (see

Figure 70)
Remove the lock on the hand pump monthly / 4 grease shots
In addition to the lubrication plan, please also refer to the section

18.3 “Maintenance Plan”.
15 Remove resin and wood residues from the swivel segments once a week.
3
2
4
1
5 5
6