1. Construction Aid Setup
2X
3X
1X
5X
Tip:
L, S, and Cam Spacer dimensions are found in the
Racking Construction Set. See Sheet Title:
Typical Array
Dimensions
.
1.1 Assemble the Spacer Stick and adjust to L & S dimensions.
All dimensions are measured from the Base centerlines.
Tip:
To stiffen the Spacer Stick, place one Rail
2000695/2000895 on the assembly as shown, shift the Rail
to find a location which allows for attachment with the
specified bolts. Tighten the bolts.
1.2 Insert the bolt and adjust the Cam Spacer to the Cam
Spacing dimension.
Adjust Spacer Stick
Spacing S
Spacing L
Typical Cam
Spacer Usage
1X
Rail 2000695/2000895
The optional 2000761 center
piece is used only if 5000610 is
shipped and the Racking
Construction set calls for
750mm “S” spacing.
Cam Spacer
Cam
Spacing
Tip:
Cam Spacing is measured
off the highlighted face and
not the extended tab on the
back of the Cam Bracket