8. Install Module High Side
8.1 Rotate the module down and rest the module frame on
top of the Tilt Arms.
8.2 Support the module carefully while rotating the Tilt Arm
just enough to rest the module frame on the extended
portion of the Tilt Arm.
8.3 Pull the Tilt Arm forward until the Tilt Arm is firmly in
place against the module frame. This ensures the Lock
Claw is fully engaged.
ALERT:
Failure to reset the Lock Claw will
compromise system performance.
Tip
: Use two hands when installing the Tilt arm.
1
2
3
1
2
Module Removal
Module Installation
Lock Claw
Tilt Arm
LOCK CLAW NOT INSTALLED
TILT ARM NOT FULLY ENGAGED
DO NOT REST ON BACKSHEET
TILT ARM UNEVENLY ENGAGED
8.4 To uninstall the module press up on the bottom
flange of the Lock Claw and rotate the Lock Claw out.
8.5 Rotate the Tilt Arm off the module.
8.6 To reinstall the module, reset the Lock Claw by
pressing it back into the Tilt Arm and repeat module
installation steps.
Module Reinstall (Lock Claw Reset)