10. Install Deflectors
Place the bottom edge of the Deflector in the
Deflector Seat near the bottom of the Tilt Arm.
Fasten to Tilt Arm with bolt and tighten to
6 ft-lb
.
10.1
10.2
ALERT:
Consult Sheet Title
: Ballast Layout
–
XX
in the
Racking Construction Set for Deflector requirements.
Each Array layout sheet will specify required
Deflector quantity.
Center Deflector on module
for all non edge modules
Tip:
On array edge Deflectors should be
installed flush to module/array edge
when spacing permits. Some stick out
may be unavoidable.
Tip:
Adjacent Deflectors will
overlap (adjacent Deflector not
shown).
Deflector
Seat