INSTRUCTIONS CM385E
For Technical Support: www.panduit.com/resources/install_maintain.asp
3.5”
INSTALL BOTTOM DUCT MOUNTING
BRACKET AT 1st SET OF PAIRED HOLES
FROM BOTTOM OF CABINET POST
54.25”
INSTALL TOP DUCT MOUNTING
BRACKET AT 16th SET OF PAIRED
HOLES FROM TOP OF CABINET POST
Page 5 of 12
Intake Duct Installation
Assemble lower intake duct to upper intake duct using (3) #10-32 hex nuts with integrated lockwashers and (2)
#10 washers (placed inside the ducting). Adjust intake duct to fit suggested installation location as shown below.
Install (2) universal ducting brackets on the top and bottom surfaces of the intake duct using (6) #10-32 Phillips
screws and (6) #10 lockwashers.
Mount intake duct assembly to cabinet posts using (4) #12-24 serrated hex head screws through ducting brackets
as shown. Install (1) #12-24 serrated hex head screw at back of intake ducting, securing intake ducting to cabinet
equipment rail (see detail view). Ensure that lower intake duct rests on bottom cabinet beam.
FRONT OF CABINET
[1] #12-24 Serrated
Hex Head Screw
(use 5/16” socket wrench)
[4] #12-24 Serrated
Hex Head Screws
(use 5/16” socket wrench)
Universal
Ducting
#10-32 Pan Head
Phillips Screws and
#10 Lockwashers
Bracket
Lower Intake Duct
Upper Intake Duct
(secure to upper
intake duct wit
[3] #10-32 hex nut
and [2] #10 washer)
REAR OF CABINET
