INSTRUCTIONS CM385E
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 9 of 12
Vertical Side Support Installation
Mount (2) vertical side supports using (4) #10-32 nuts and (4) #10 lockwashers per post; (2) at top and (2) at bottom (there are (4) pre-installed
press studs in each post).
Vertical Side Supports
#10-32 Nuts and #10 Lockwashers
(use 3/8” socket wrench)
Assembled
Installation of Lower Horizontal Supports
Mount (4) lower horizontal supports, using (2) #10-32 flat head screws and (2) #10 lockwashers (at bottom side extension) and (1) 1/4-20 hex
head screw (at door shoe extension) per lower horizontal support as shown.
#10-32 Flat Head Screws
1/4-20 Hex Head Screw
and #10 Lockwashers
and #10 Lockwashers
#10-32 Flat Head Screws
(use 1/8” Allen Key)
(use 1/8” Allen Key)
(use 7/16” socket wrench)
These surfaces
must be flush with
original top cap
NOTE:
In order to install the
vertical side supports, the top
extenders must be flush with the
top cap surface as described on
page 6 of 10.
Vertical Side Supports
Assembled
Lower Horizontal Supports
Lower Horizontal Supports
See Detail View
