INSTRUCTIONS CM385E
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 4 of 12
Exhaust Duct Installation
NOTE: DO NOT break yellow banding on ducting cartons until ducting is ready for installation.
Install (2) universal ducting brackets on the top and bottom surfaces of the exhaust duct using (6) #10-32 pan head Phillips screws and
(6) #10 lockwashers. Mount duct assembly to cabinet posts using (7) # 12-24 serrated hex head screws through ducting brackets and slotted
flange as shown. The top flange of duct assembly should be positioned above the top surface of switch.
Assembled
Universal Ducting
Bracket
#10-32 Pan Head
Phillips Screws
#10 Lockwashers
[7] #12-24 Serrated
Hex Head Screws
(use 5/16” socket wrench)
FRONT OF
SWITCH
Position Duct Assembly
Top Flange Above Top
Surface of Switch
Exhaust Duct
See Detail View
Duct Assembly
Top Flange
