INSTRUCTIONS CM385E
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 2 of 12
Remove J-Hooks
CN3 Cabinet Preperation
Remove all (4) J-Hooks from CN3 cabinet by removing
(2) #12-24 screws per J-Hook as shown.
All four rails are fully adjustable. To change depth, loosen three (3) 5/16 x 3/4” mounting bolts per cabinet rail using a 1/2” socket
wrench and slide rails flush with cabinet posts. Retighten the mounting bolts to 14ft.-lbs. Proper torque ensures equipment rails are
bonded to the cabinet frame.
5/16” Mounting Bolt
(use 1/2” socket wrench)
Adjusted Rails
J-Hook
#12-24 Screws
Reposition Equipment Rails
Remove Door Shoe Bumpers and Bushing
Remove (3) door shoe bumpers and (1) door rod bushing from
each door shoe on the CN3 cabinet as shown.
5/16” Mounting Bolt
(use 1/2” socket wrench)
Bumpers
Door Rod Bushing
