CT-2600 and CT-2600/E
CT-2600 & CT-2600/E
PA26001A01_02
Page: 3 of 11
5-2009
CAUTION
•
Do not perform any service or maintenance other than as described in this manual.
Injury or damage to the tool may result.
•
This tool is not designed for continuous use.
•
After 30 to 40 cycles, allow the tool to cool for 15 minutes.
•
Do not place the tool in a vise. The tool is designed for hand-held operation.
•
Protect the tool from rain and moisture. Water will damage the tool and battery.
•
Crimping tools should not be operated in pouring rain or under water.
•
Use this tool for the manufacturer’s intended purpose only.
CAUTION
•
Do not operate the tool without dies. Damage to the ram or crimping head can result.
•
Do not operate tool with the locking flange open. The crimp head must be completely closed and locked in
position before cycling the tool.
CAUTION
•
Do not allow anything to contact the battery terminals.
•
Do not immerse the batteries in liquid. Liquid may create a short circuit and damage the battery. If batteries
are immersed, contact your service center for proper handling.
•
Do not place the battery into a pocket, tool pouch, or tool box with conductive objects. Conductive objects
may create a short circuit and damage the battery.
•
Do not place a battery on moist ground or grass. Moisture may create a short circuit and damage the
battery.
CAUTION
•
Do not store the battery at more than 140°F (60°C). Damage to the battery can result.
•
Do not use another manufacturer’s charger. Other manufacturers’ chargers may overcharge and damage
the battery.
•
Do not attempt to open the battery. It contains no user-serviceable parts.
IMPORTANT INFORMATION
•
Keep the tool head and tool body portion clean and free from debris. Soap and a damp cloth should be used
to clean the tool body.
•
Always store the tool in its clean, dry carrying case when not in use.
•
Always point tool away from others.
•
If the tool is kept in cold temperatures below 23
o
F/-5
o
C for any extended time, it is advisable to return the tool
to room temperature for 1 hour before using.
•
Always verify the proper size terminal for the conductor (wire), by checking the color code and the printing on
the terminal.
•
Avoid dropping the tool. Extreme shock may damage the hydraulic circuit and result in malfunction of the
tool.
NOTE: In the interest of higher quality and value,
PANDUIT
products are continually
being improved and updated. Consequently, pictures may vary from the enclosed
product.
