CT-2600 and CT-2600/E
CT-2600 & CT-2600/E
PA26001A01_02
Page: 7 of 11
5-2009
TOOL OPERATION
LED Display
This tool is equipped with a special circuit board incorporating several important features to inform the
user about the current status of the unit. The LED signals in the following cases:
SIGNAL
DURATION
WHEN IT OCCURS
WHAT IT MEANS
A few seconds of
flashing
Battery insertion
Self check – O.K.
Glowing for 20
seconds
After crimp
Battery discharged
Flashing for 20
seconds (2Hz)
After crimp
Time for inspection and
preventive maintenance
20 sec. glowing and
flashing intermittently
After crimp
Battery discharged –
Time for inspection and
preventive maintenance
Preparing Wire and Positioning Terminals
Follow the instructions for appropriate wire strip length and crimp die as marked on the terminal
packaging. Position terminal centrally under crimp die as shown in Figures 2-4 on Page 7.
NON-INSULATED TERMINALS (P Series)
PRE-INSULATED TERMINALS
(PV and PK Series)
P8 & P6
P4 & P2
PV8 – PV2
Fig. 2
Fig. 3
Fig. 4
Crimping Terminals
ATTENTION: The crimping process can be interrupted at any time by releasing the
trigger. After having terminated the crimping process, remove
battery to avoid unintended starts.
