Panduit ATLONA AT-UHD-SW-52ED Скачать руководство пользователя страница 15

Страница: 15 / 57

AT-UHD-SW-52ED

Installation

IP Configuration

The AT-UHD-SW-52ED is shipped with DHCP enabled. Once connected to a network, the DHCP server (if available),

will automatically assign an IP address to the unit. If the AT-UHD-SW-52ED is unable to detect a DHCP server within

15 seconds, then the unit will use a self-assigned IP address within the range of

169.254.xxx.xxx

Use an IP scanner, along with the MAC address on the bottom of the unit, to identify the unit on the network.

If a static IP address is desired, the unit can be switched to static IP mode. The default static IP address is

192.168.1.254

Setting the IP Address using the Web Server

The AT-UHD-SW-52ED can be set to either DHCP or static IP mode. If changing the IP mode through the built-in

web server, the IP address of the AT-UHD-SW-52ED must be known. By default, the AT-UHD-SW-52ED is set to

DHCP mode and will automatically be assigned an IP address by a DHCP server. Refer to the

Changing the Network

IP Mode (page 18)

for more information.

Auto IP (APIPA) Mode

If the AT-UHD-SW-52ED is unable to detect a DHCP server within 15 seconds, then the unit will use a self-assigned

IP address within the range of

169.254.xxx.xxx

. If this occurs, connect the AT-UHD-SW-52ED to a computer running

Microsoft Windows® and follow the procedure below.

1. Click

Start

Settings

Control Panel

Network and Sharing Center

2. Click

Change adapter settings

Right-click on the adapter that is used to establish a wired connection to the network, and select

Properties

from the context menu.

4. Under the

Ethernet Properties

dialog box, select

Internet Protocol Version 4

and then click the

Properties

button.

5. Click the

Use the following IP address

radio button.

IMPORTANT:

Before continuing, write down the current IP settings in order to restore them, later.

Obtain an IP address automatically

and

Obtain DNS server automatically

are selected, then

this step is not required.

6. Enter the desired static IP address or the IP address provided by the network administrator. If the PC does not

require Internet access or if a statically-assigned IP address is being used, then an IP address of

169.254.xxx.xxx

can be entered.

Set the subnet mask to

255.255.0.0

Click the

button then close all

Control Panel

windows.

Содержание ATLONA AT-UHD-SW-52ED


























































Результаты поиска

Содержание ATLONA AT-UHD-SW-52ED

Отзывы:

Похожие инструкции для ATLONA AT-UHD-SW-52ED

Бренды по названию

Популярные бренды

Panduit ATLONA AT-UHD-SW-52ED, Руководство пользователя

Результаты поиска

Содержание ATLONA AT-UHD-SW-52ED

Отзывы:

Похожие инструкции для ATLONA AT-UHD-SW-52ED

Бренды по названию

Популярные бренды