AT-UHD-SW-52ED
11
HDMI 1
HDMI 2
HDMI 3
HDMI 4
HDMI 5
VOLUME
AT-UHD-SW-52ED
POWER
INPUT
S/PDIF OUT
RX TX
RS-232
LAN
FW
DC 48V
+
-
1
2
3
4
5
HDMI IN
HDMI OUT
HDBaseT OUT
AUDIO OUT
IR
L
R
P S
S
IN
OUT
Panel Description
Rear
Panel
1 HDMI IN
Connect an HDMI cable from each of these ports to a
UHD/HD source.
2 AUDIO OUT
Connect an audio output device to this port using the
included captive screw block. Refer to
3
HDMI OUT
Connect an HDMI cable from this port to an HD/UHD
display.
4 S/PDIF OUT
Connect an RCA-type cable from this port to the
S/PDIF audio input port on an A/V receiver or other
audio output device.
5 HDBaseT OUT
Connect a category cable from this port to a the
HDBaseT IN port of a compatible receiver unit.
6 FW
Connect a USB-to-mini USB cable to this port from a
computer for firmware updates.
7
IR IN/OUT
Connect the included 5-pin captive screw block to
this port.
8 LAN
Connect an Ethernet cable from this port to the Local
Area Network (LAN). The AT-UHD-SW-52ED includes
a built-in web server, which can be used to manage
and configure the product.
9
RS-232
Connect the included captive screw block to an RS-
232 controller to control the AT-UHD-SW-52ED.
10 DC 48V
Connect the included 48 V DC power supply from
this power receptacle to an available AC electrical
outlet. Refer to
for more
information on wiring the included captive screw
connector.
1
3
5
6
8
10
2
4
7
9