AT-UHD-SW-52ED
45
Configuration and Management Interfaces
Control Page
This page provides controls for CEC, device timers, and configuration for controlling external devices.
Power
Click this drop-down list to select the control protocol for the
POWER
button on the front panel. Available options
are
None
,
CEC
,
RS-232
, or
IP
. To power-on and power-off the AT-UHD-SW-52ED, set this drop-down list to
None
.
Volume/Mute
Click this drop-down list to select the control protocol for the
Volume/muting
buttons
on the front panel.
Available options are
Audio Out
,
RS-232
, or
IP
.
Setting
Description
DispSW AVon
Display switches on/off, source audio/video signal always on.
DispSW AVSW
Display switches on/off, source audio/video signal switches on/off.
AV SW
Display is always on, source audio/video signal switches on/off
Always ON
Both source and display are always on.
Setting
Description
Audio Out
Volume and mute buttons will control the volume output of the AT-UHD-SW-52ED.
RS-232
Volume/Mute buttons will send RS-232 commands over HDBaseT to compatible
receivers and displays.
IP
Volume/Mute buttons will send the commands over Ethernet using either the
LAN
port
or the
CAT5e/6/7
(HDBaseT) port.
NOTE:
To display all settings on the screen, as shown below, the
Display Auto Power
drop-down
list must be set to
Enabled
.
Display Mode
Click this drop-down list to select the power mode for the source / display.