Panduit ATLONA AT-UHD-PRO3-1616M, Руководство пользователя, Страница: 63 / 76

AT-UHD-PRO3-1616M 63
EDID page
The Web GUI
EDID Reset
Click this button to reset all EDID settings to the factory-default settings. Note that this will erase any stored EDID
data in memory.
Output 1 - Output 20
Click the EDID Memory drop-down list to select the memory location where the EDID, displayed under the Output
EDID column, will be stored. Note that each drop-down lists is available, only if a sink device is connected to the
output.
Save
Click this button to commit all changes for outputs.
Cancel
Click to abort changes.
Input 1 - Input 16
Click the EDID Selection drop-down lists to assign the desired EDID to an input. Stored EDID data will also be
displayed in these drop-down list if EDID data was captured. Refer to EDID Management (page 37) for more
information.
Save
Click this button to commit all changes for inputs.
Cancel
Click to abort changes.