manualshive.com logo in svg

Panduit ATLONA AT-UHD-PRO3-1616M, Руководство пользователя, Страница: 3 / 76

Поделиться
Скачать
Panduit ATLONA AT-UHD-PRO3-1616M Скачать руководство пользователя страница 3

AT-UHD-PRO3-1616M

3

Thank you for purchasing this Atlona product.  We hope you enjoy it and will take a extra few moments to register 

your new purchase.

Registration only takes a few minutes and protects this product against theft or loss.  In addition, you will receive 

notifications of product updates and firmware.  Atlona product registration is voluntary and failure to register will not 

affect the product warranty.

To register your product, go to http://www.atlona.com/registration

Sales, Marketing, and Customer Support

Welcome to Atlona!

Operating Notes

Main Office

Atlona Incorporated

70 Daggett Drive

San Jose, CA  95134

United States

 

Office: +1.877.536.3976 (US Toll-free)

Office: +1.408.962.0515 (US/International)

Sales and Customer Service Hours

Monday - Friday: 6:00 a.m. - 4:30 p.m. (PST)

http://www.atlona.com/

International Headquarters

Atlona International AG

Ringstrasse 15a

8600 Dübendorf

Switzerland 

Office: +41 43 508 4321

 

Sales and Customer Service Hours

Monday - Friday: 09:00 - 17:00 (UTC +1)

IMPORTANT:

 Visit http://www.atlona.com/product/AT-UHD-PRO3-1616M for the latest firmware 

updates and User Manual.

IMPORTANT:

 This product will no longer include a handheld remote control beginning January, 

2021. IR control codes for this product can be found in the Resources Tab in the document titled “IR 

Codes” or by clicking this 

link

Содержание ATLONA AT-UHD-PRO3-1616M













































































Отзывы:

Нет отзывов