manualshive.com logo in svg

Panduit ATLONA AT-UHD-PRO3-1616M, Руководство пользователя, Страница: 15 / 76

Поделиться
Скачать
Panduit ATLONA AT-UHD-PRO3-1616M Скачать руководство пользователя страница 15

AT-UHD-PRO3-1616M

15

Installation

Using the web GUI

1. 

Login to the web GUI.  Refer to 

Introduction to the Web GUI (page 54)

 for more information.

2.  Click 

Network

, under the 

Settings

 section in the menu bar on the left side of the screen.

•  Click 

ON

, next to 

DHCP

, to set the matrix to DHCP mode.  If set to DHCP mode, the IP Address, Subnet, 

and Gateway fields will automatically be assigned by the DHCP server (if one exists).  If no DHCP server 

can be found, the matrix will be assigned the static IP address of 192.168.0.150 with a subnet mask of 

255.255.255.0.

•  Click 

OFF

 to set the matrix to static IP mode.  When set to static IP mode, enter the required information in 

the 

IP Address

, 

Subnet

, and 

Gateway

 fields, as shown in the illustration below.

3.  Click the 

Save

 button to commit changes.

Содержание ATLONA AT-UHD-PRO3-1616M













































































Отзывы:

Нет отзывов