manualshive.com logo in svg

Panduit ATLONA AT-UHD-PRO3-1616M, Руководство пользователя, Страница: 49 / 76

Поделиться
Скачать
Panduit ATLONA AT-UHD-PRO3-1616M Скачать руководство пользователя страница 49

AT-UHD-PRO3-1616M

49

Advanced Operation

4. 

Launch a web browser and login to the web GUI.  Refer to 

Introduction to the Web GUI (page 54)

 for more 

information.  The factory-default username and password are listed below: 

 

Username: 

root

 

Password: 

Atlona

 

5.  Click 

Control

 in the side menu bar.

6.  Select the proper baud rate, data bit, parity, and stop bit settings for the HDBaseT OUT port.  These settings 

must correspond with the RS-232 settings of the receiver unit (e.g. AT-UHD-100CE-RX).  Referring to the 

example diagram on the previous page, 

ZONE OUT 3

 will need to be configured.

7.  Click the 

Save

 button to commit changes.

8. 

Use the following command to send a command to the display (sink) device, where 

display_command

 is the 

command data to send: 

 

RS232Zone4[display_command$0d]

 

 

$0d

 (carriage return) should only be added to end of the string if the sink device is expecting this character.

Содержание ATLONA AT-UHD-PRO3-1616M













































































Отзывы:

Нет отзывов