Panduit ATLONA AT-HDR-CAT-2 Скачать руководство пользователя страница 7

Страница: 7 / 54

AT-HDR-CAT-2

The Atlona

AT-HDR-CAT-2

is a high dynamic range (HDR) distribution amplifier with one HDMI

input and two

HDBaseT™ outputs Each output transmits 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling plus support for

HDR formats, multi-channel audio, control signals, and power up to 130 feet (40 meters) or 1080p up to 230 feet

(70 meters) over Category 6/6A cable. The HDR-CAT-2 features sophisticated integration capabilities designed for

commercial AV distribution applications including HDMI pass-through, audio de-embedding, EDID management,

CEC display control, RS-232 and IR control extension, remote power for receivers, and HDBaseT link testing. It

offers compatibility with any TCP/IP or RS-232 control system and is housed in a low-profile enclosure with external

universal power supply. The HDR-CAT-2 is ideal for sending HDR and 4K/60 4:4:4 content to AT-HDR-EX-70C-RX

receivers.

Introduction

Features

Package Contents

•

4K HDR distribution amplifier with one HDMI input and two HDBaseT outputs.

•

Pass-through HDMI output to support local monitor.

•

4K/UHD capability @ 60 Hz with 4:4:4 chroma sampling.

• Supports 4K HDR10 and Dolby® Vision

™

•

Features visually lossless compression with no latency to enable HDR and 4K/60 4:4:4 video signal extension

over HDBaseT.

•

HDBaseT outputs extend HDMI, control signals, and power up to 130 feet (40 meters) for 4K HDR or 230 feet (70

meters) for 1080p with Category 6/6A.

•

Bidirectional RS-232 and IR control extension for each output.

•

Remotely powers compatible receivers over HDBaseT.

•

CEC display control sends display power on/off commands over HDBaseT using the power button, IP, or RS-

232.

• Audio de-embedding to balanced analog output with volume control for integration with a separate audio system.
•

HDBaseT link test verifies cable, termination, and link quality for more reliable installations.

• Multi-channel audio pass-through.
•

Cascade up to 8 units to expand system without compromising performance.

•

Compliant with HDCP 2.2, the latest specification for passing protected content between devices.

•

Fully supports video resolutions, audio formats, and color space formats in the HDMI 2.0b specification.

• Manages EDID communications with the source through a display’s EDID or internally stored EDID.
•

Intuitive GUI-based configuration using integrated web server.

•

Flexible control options via TCP/IP, RS-232, and IR with Atlona Velocity

™

or third-party control systems.

•

Easy to configure and manage with AMS (Atlona Management System).

•

Front panel includes LEDs for power, HDBaseT link, and HDMI signal status information as well as buttons for

power and EDID control.

•

Low-profile enclosure for easy installation under a table or in furniture.

1 x AT-HDR-CAT-2

4 x 5-pin captive screw connectors

1 x 2-pin captive screw connector

1 x 48 V / 1.25 A power supply

1 x AC cord

1 x Pair rack mount ears

4 x Feet w/ rubber grips

Содержание ATLONA AT-HDR-CAT-2























































Результаты поиска

Содержание ATLONA AT-HDR-CAT-2

Отзывы:

Похожие инструкции для ATLONA AT-HDR-CAT-2

Бренды по названию

Популярные бренды

Panduit ATLONA AT-HDR-CAT-2, Руководство пользователя

Результаты поиска

Содержание ATLONA AT-HDR-CAT-2

Отзывы:

Похожие инструкции для ATLONA AT-HDR-CAT-2

Бренды по названию

Популярные бренды