Panduit ATLONA AT-HDR-CAT-2 Скачать руководство пользователя страница 46

Страница: 46 / 54

AT-HDR-CAT-2

Configuration and Management Interfaces

Power

Determines the power state of the AT-HDR-CAT-2.

Telnet Timeout

Click this drop-down list to select the timeout interval, in seconds, before the Telnet connection is automatically

closed after no activity. Range: 1 to 3600 (seconds).

Broadcast

This option determines whether or not systems changes are announced over TCP/IP connections to any listening

devices.

System

Setting

Description

System changes will be announced over TCP/IP connections to any device that has a

TCP/IP connection to the AT-HDR-CAT-2. This is the default setting.

OFF

only the device that is sending the commands will receive feedback from the

commands or any system changes. Read queries, such as the

IPCFG

and

Type

commands, are not announced and will only return information to the requester.

Setting

Description

Under normal operation conditions, this toggle is set to ON.

OFF

Places the AT-HDR-CAT-2 in standby mode. The

PWOFF

and

PWON

commands can

also be used to control the power state.

Setting

Description

LOCK

Locks the front panel buttons.

UNLOCK

Unlocks the front panel button, allowing them to be functional.

Lock

Click to lock or unlock the buttons on the front panel. Locking the front panel buttons is useful in preventing

accidental button activation within rack environments.

Hostname

Displays the hostname of the AT-OME-MS42, as it would appear on a network. To change the hostname, type

the new hostname in this field and click the

Save

button. Refer to

Setting the Host Name (page 34)

for more

information.

Содержание ATLONA AT-HDR-CAT-2























































Результаты поиска

Содержание ATLONA AT-HDR-CAT-2

Отзывы:

Бренды по названию

Популярные бренды

Panduit ATLONA AT-HDR-CAT-2, Руководство пользователя

Результаты поиска

Содержание ATLONA AT-HDR-CAT-2

Отзывы:

Бренды по названию

Популярные бренды