Pluto User Manual v1.38
Page 44 of 66
CDL into A
and
Recall CDL into B
.
Only one look should be selected for the
Recall CDL
function. If you have more
than one look selected no action is taken. Only the CDL values are recalled. The
slot is not loaded.
Note that you do not have to recall the CDL values into the same side that they
were in when the look was stored. In the example menu on the previous page,
the Pluto is in single-head mode and so all looks are recalled to the A side, even
Look number 58, which was stored from the B side. In dual-head mode you can
choose which side to recall into. This makes it very easy to copy a CDL from one
side to the other.
If you have one or more looks selected,
Delete Selected
will flag all of the
selected looks for deletion. This will stop them from being shown in the list, and
also stop them from appearing in the EDL/ALE files when the Look data is
uploaded to the GUI.
Note that the looks aren't actually deleted. They are only flagged for deletion.
This means that they are not removed from the Look database and, if you keep
marking and deleting, eventually the database will fill up and you won't be able
to mark any more looks. The only two ways to
really
clear the data are to check
the
Clear Data After Upload
checkbox in the GUI when uploading the data or
with the
Clear All Look Data
option in the Clear Memory SubMenu from the Setup
menu of the OSD. It is important that you select one of these options
occasionally when the Look data is no longer needed.
Undo Last Deleted
will remove the Deleted flags that were most recently set
from the
Delete Selected
action. This can only be done immediately after the
deletion to correct a mistake. If you close the menu or mark any more looks you
can no longer undo the last deletion.
Pandora Technology
United Kingdom
www.pandora-int.com
October 2013
