Pluto User Manual v1.38
Page 15 of 66
3.2.3 Network Settings on the PLUTO
Pluto ships with a default IP address
192.168.0.198
but this can be easily
changed using the on screen display and the front panel knob.
You need to have video connected to the Pluto and the display showing on an HD
monitor.
Using the Left Hand control knob click once and then navigate to
SETUP-> NETWORK.
Here you can change the Ethernet settings for IP address / Subnet Mask and
Gateway.
Default settings should be IP 192.168.0.198
SUBNET 255.255.255.0
GATEWAY 192.168.0.1
If you have more than one Pluto on the same network change the last digit of
the IP address so that they are all unique.
Once you are done click on “Save and REBOOT” and the Pluto will restart with
the new values.
Remember THE BASIC RULES …...
[1] Each Device on the network should have the NETWORK ADDRESS set to the
SAME value [this is the fist three digits of the IP address]. e.g. 192.168.0.xxx
[2] Each Device on the network must have a unique setting for the HOST
ADDRESS [The fouth digit of the IP address].
Values can range between 1 and 255.
[3] The Subnet Mask on ALL devices should be set to 255.255.255.0
[4] The Gateway [or Router] address on ALL devices should be set to any other
unique address in the same domain usually “1”. e.g. 192.168.0.1
Pandora Technology
United Kingdom
www.pandora-int.com
October 2013
