Pluto User Manual v1.38
Page 42 of 66
4.10 CDL Menu
(Right hand knob, single press)
To access the CDL menu, press the right hand control knob once.
Side A
,
Side B
or
Both Sides
-
this setting determines which signal path the
Pluto trackball mouse is going to alter, if it is used. The next chapter describes
how to use the trackball mouse. Note that this does not affect the side that is
controlled from the CDL tab in the GUI (see the CDL tab section in chapter 3).
These options only appear if the Pluto is Dual Head mode is turned on.
INPUT
or
OUTPUT
- this setting determines whether the CDL grade is applied
before or after the 3d Cube in a Slot (when controlling the CDL with the
trackball, not from the CDL tab in the GUI). Also, when the CDL is sent to slot it
will determine whether it is saved in the Input or Output 1d LUT position. Refer
to LUT slot section in Chapter 2 for more information.
Slot
-
By Default the CDL will be saved into the Input or Output of the current
selected Slot. Use this setting to choose an alternative slot if required.
Send to Slot
- click on this to save the current CDL data into the selected slot.
Mark Grade
- click on this to save the current CDL data into the Pluto memory
for future download. This is identical to the
Mark Look
option in the Looks Menu.
Pandora Technology
United Kingdom
www.pandora-int.com
October 2013
