Pando PI-3110, Руководство по установке

Страница: 164 / 184

13. FAULT VISUALISATION AND INSPECTION
FAILU
RE
PROBLEM SOLUTION A
No power is supplied.
Check that the plug is securely fitted into the
socket and that the socket is working.
Connected accessory power supply
board and display board fail.
Check the connection.
The accessory power supply board is
damaged.
The LED does not light up
when the unit is plugged in.
The display board is damaged.
Some buttons do not work
or the LED display is not
normal.
The display board is damaged.
Please contact the technical service.
High hotplate temperature.
Something is wrong with the fan.
The cooking mode indicator
lights up, but heating does
not start.
The power supply board is damaged.
Ambient temperature may be too high. The air
inlet or outlet may be blocked.
If the problem persists, contact technical support.
Pan Type is wrong.
The diameter of the pot is too small.
Use the appropriate pot (see instruction manual).
The heating suddenly stops
during operation and "u"
flashes on the display.
The pan has overheated;
The unit is overheated. Wait for the temperature to
return to normal.
Press the "ON/OFF" button to reset the unit.
Failure in the connection of the power
board and the display board;
Check the connection.
The display board of the
communication part is damaged.
Heating zones on the same
side (such as the first and
second zone) would show
"u" .
The main board is damaged.
The fan motor sounds
abnormally.
The fan motor is damaged.
Please contact the technical service.
GB
23