Pando INOXPAN S.L, Руководство пользователя и инструкция по установке

Страница: 71 / 104

INOXPAN S.L. EN - 71
7. 1.1. Pando LED. Setting Mode with electronic panel.
With this button control 11 different temperature (ºK)
– colour- adjustment levels are available, and in addition
10 different bright/intensity levels. Once the desired mode is changed, this last set will be maintaining.
•
Setting Mode
With the hood off, keep press “Light” button for at least 3 seconds, then buttons
“Up/Down” will shine and lighting button will flicker. This mode is active while we keep pressing
different adjustments.
3”
•
Brightness / Intensity settings. With the setting mode on, try short and paused pushes on button
“Down”; with it the brightness can be set up to 10 different tones between 10 and 100%. Going from
low to high, should a lower tone be needed then the cycle needs to be finish to start over.
10……..100%
•
Colour and/or temperature settings ºK. On set mode on, give short and paused pushes on button
“Up”, allowing colour change up to 11 different tones between 2700ºK and 6000ºK, or 2700ºK and
4000ºK depending on the LED version. Going from low to high, should a lower tone be needed then
the cycle needs to be finish first to start over.
2700………6000ºk
2700………4000ºk
Setting Mode Off. After 15 seconds without pressing any button, the setting mode is automatically turned off,
“Down / Up” buttons switch off and lighting remains on with latest adjustment set.