Pandigital ZINK PANPRINT01, Руководство пользователя

Страница: 9 / 64

9
Left side
Plugging in
Plug the power supply into the DC-in connector on the printer, and plug the other end of the power
supply into an available power socket (100-240v, 50~60 Hz 1.2A max).
Loading ZINK Paper
®
Use only Pandigital ZINK Paper
®
. Do not use any other brands of ZINK paper. You can purchase
more Pandigital ZINK Paper
®
from local retailers or from our website: http://www.pandigital.net.
CAUTION: Be careful when handling the ZINK Paper
®
, as finger prints or moisture on the
printable surface will reduce the print quality. Hold the paper carefully along the edges
when loading the paper tray.
Note: Always store the ZINK Paper
®
completely flat. If the paper edges are curled it may not feed
into the printer.
1. Squeeze tabs on each side of the ZINK paper tray to open the lid.
Note: Each pack of ZINK Paper
®
includes a Smartsheet
®
that MUST be inserted at the
bottom of the stack when inserting a new pack of ZINK Paper
®
into the tray.
2. Insert the Smartsheet
®
with printing down on the bottom, and the ZINK Paper
®
with the
blank white side facing up on the top, and then close the lid.
ZINK Paper
®
out slot
TO PC 28V-DC
Press to open
Press to open
Insert
This side up