Pandigital ZINK PANPRINT01, Руководство пользователя

Страница: 22 / 64

22
Error and Job Status Messages (stand-alone printing)
Driver does not
automatically install Try to install the driver manually. Refer to “Manual Installation for
Windows” on page 15.
Printer hangs (no response) Power off/on to reboot printer. If still no response, unplug and plug
back in. The printer should reboot.
Memory card cannot be read Make sure the card is not damaged.
Push the card all the way into the card slot.
Make sure the card can be read by a PC or card reader.
Message Description Solution
“Out of paper”
ZINK Paper
®
tray is
empty
Add ZINK Paper
®
to the ZINK Paper
®
tray
“Corrupt File” Error in file
information or bad
image found Press Next button to read next image for preview
“System error” Un-recoverable fatal
error found 1. Power off and on again
2. If step 1 does not fix error, call technical support
“Paper jam
Reboot”
1. ZINK Paper
®
pickup error occurred
2. ZINK Paper
®
ejects, but fails to
finish ejection
Never force or pull a sheet of ZINK Paper
®
out of
the printer if it is stuck or jammed .
To clear, try the following:
a) press and hold the Power button until the printer
feeds the sheet of paper through
b) unplug the power cord & plug back in
c) print another photo.
Failure to follow these instructions may result in
permanent damage to the printer.
“Feed Failure”
“Check Paper”
ZINK Paper
®
failed
to feed
Remove ZINK Paper
®
tray and inspect the sheets of
paper. Separate sheets if stuck together, flatten before
putting back into the ZINK Paper
®
tray, reinsert tray,
and printer will resume.
“Unsupported
File“ Image file format
may not be
supported Check image files.
• Photo files must only be a JPG (baseline &
EXIF) and not in a progressive format. The
printer will not recognize any other photo format
(i.e., gif, tif, etc.).
• The printer can only support up to 3000x4000
pixel image size, or up to a 5MB file size.
“Memory Not
Recognized” Unsupported card
was found 1. Check User Guide to see if card type is supported
2. Power off and on again, or unplug & plug in again
3. Try a different card, and make sure it can be read by
a PC or card reader
4. If steps 1-3 do not fix error, call technical support