11
Attach the Countertop Stand
TIP
: Leave the clear protective plastic sheet taped on the front of the LCD until you have
attached the stand or mounted the unit on the wall or under a cabinet.
1. Remove the white packaging cover from the KTC monitor and lay the cover on a flat surface.
2.
Place the KTC monitor face down on the cover, or other type of protective material such as a
cloth, to protect the bezel from scratching.
3.
Position the bottom edge of the monitor facing you along the edge of the flat surface so the stand
can hang over the edge when connected.
4. Tilt the stand slightly to insert the two tabs on the stand assembly into the slots on the top of the
stand, and then lower the stand so it lays flat against the stand assembly
(as shown above)
.
5. Use a Phillips head screw driver to insert the three small screws from the bottom of the stand and
hand tighten.
6. Turn the KTC upright and remove the protective plastic sheet from the front of the monitor.
Tabs
