P&E Microcomputer Systems Cyclone FX Series, Руководство пользователя

Страница: 99 / 149

User Manual For Cyclone LC Programmers 99
HC08: CSAPMON08Z.exe
MPC55XX-57XX: CSAPPPCNEXUSZ.exe
RS08 : CSAPRS08Z.exe
S12Z : CSAPS12ZZ.exe
STM8: CSAPWIZ01.exe
9.1.2 Filename and Additional Command-Line Parameters
After specifying the executable, the user must also include the [filename] parameter, which
represents the path and filename of the .CFG file. This is shown in blue in the example below. The
user may also include one or more other command-line parameters. The area of the example in
violet shows these other command-line parameters.
>csapacmpz.exe "C:\MyWorkspace\MyProject\KL25Z128_script.cfg"
/imagefile "C:\MyWorkspace\MyProject\KL25Z128_image.sap"
9.1.3 List of Valid Command-Line Parameters
Here is the listing of valid parameters:
[executable]
Specifies the particular CSAP executable that is compatible with the user’s device
.
Mandatory.
[filename] A configuration file containing configuration commands and comments,
default = PROG.CFG. Mandatory.
[?] Use the '?' character option to cause the utility to wait and display the result of
configuration in the image compiler window. If the user does not use a batch
file to test error level, this provides a method to display the configuration
result. This option should be the FIRST command-line option.
[hideapp] This will cause the CSAP executable programmer to NOT display a visual
presence while running, with the exception of appearing on the taskbar. (32-
bit applications only)
[/logfile logfilename] This option opens a logfile of the name "logfilename" which will cause any
information which is written to the status window to also be written to this file.
The "logfilename" should be a full path name such as c:\mydir\mysub-
dir\mylog.log.
Note: When using Windows, if the logfilename path or filename include any white
spaces then the logfilename path and filename must be surrounded by dou-
ble quotation marks.
[/imagefile imagefilename]Used when the SAP file should be saved to disk instead of stored on the
Cyclone. This specifies the path and filename for the SAP file. A user may
later update a Cyclone with this image file.
Note: If the image path or filename include any white spaces then the image path
and filename must be surrounded by double quotation marks.