１６
WELDING BY MANUAL OFERATION
Welding with crater control disabled (torch switch synchronous operation)
This welding is mainly used for tack welding,, repeated short welding or thin-plate welding.
Operation Procedure
Set the CRATER
“
ON/OFF
”
selector switch to "OFF" and turn on/off the torch switch. Synchronized
with it, welding arc starts or stops.
Operation Timing Chart
BASICS
Welding Arc Start
Welding Arc Stop
Torch Switch ON
Torch Switch OFF
Torch Switch
Gas Supply
Wire Feed
Welding Voltage
Welding Current
Welding Condition Adjustment
Tpf = Gas preflow time
☆ = Arc start timing
★ = Arc stop timing
