Panasonic YD-200KR, Руководство по эксплуатации

Страница: 6 / 51

２
Power source
YD-500KR2
YD-500KR2HD□ YD-500KR2HG/N□ YD-500KR2HK□ YD-500KR2HJ□
3-Phase 220V 3-Phase 380V 3-Phase 440V 3-Phase 415V
Frequency 50/60Hz (Switchable on the printed circuit board)
Facility
capacity
Commercial power
source
40kVA
Engine generator Twice large than 31.9 kVA with compensating winding.
Primary line current Approx. 83.7A Approx. 48.3A Approx. 41.9A Approx. 44.4A
Cable
sectional
area
Welding source
input side
22mm
2
or more 14mm
2
or more 14mm
2
or more 14mm
2
or more
Welding source
output side
38mm
2
or more
When using at a construction site or in a humid place or on an iron plate or steel frame, a
leakage breaker should be also installer.
…………………………………………………………………………………………………………………
For safe use and operation, observe the following. Otherwise, the parts may he broken, arc
may become unstable, or devices may be burnt out.

Fluctuation of the supply voltage An allowable range is a rated input voltage±10%.
 When using the engine generator: use the generator which has a capacity twice larger
than the rated input of the welding source and is
provided with compensating winding.

Wiring on the input side: Attach a switch with fuse of specified capacity or no-fuse
Breaker (or leakage breaker) to the switch box for each
welding source.

When using the no-fuse breaker or leakage breaker, select those for the welding machine
or motor or transformer.

This machine has input power frequency select switch. Please confirm the correct position
of the switch. (Refer to Pages 22,23 and 25 )
 This machine should be used in combination with the specified wire feeder.
Caution