![background image](http://html.mh-extra.com/html/panasonic/wv-v6430l/wv-v6430l_operating-instructions-manual_1511966069.webp)
65
Refer to the following sheet for detailed information.
Parameter
Function
Enable
You need to check the box to enable this function.
Working Period
•
Video masking function becomes activated in the specified periods.
•
There are six periods in one day. Draw a circle to enable
corresponding period.
•
Select date. If you do not select, current setup applies to today only.
You can select all week column to apply to the whole week.
Record
After record is enabled, video masking can activate video.
Record Delay
System can delay the record for specified time after alarm ended. The
value ranges from 10s to 300s.
Relay out
Enable alarm activation function. You need to select alarm output port so
that system can activate corresponding alarm device when alarm occurs.
Alarm Delay
System can delay the alarm output for specified time after alarm ended.
The value ranges from 10s to 300s.
Send Email
If you enabled this function, System can send out email to alert you when
alarm occurs.
PTZ
Here you can set PTZ movement when alarm occurs. Such as go to
preset x when there is an alarm.
The event type includes: preset, tour and pattern.
Snapshot After
snapshot is enabled and alarm happens, the system will
automatically snapshot and alarm.
Set working period.
Click “Setup”, and it will display the interface of working period. See Figure 7-51.
Please refer to the explanation of VMD working period.
Figure 7-51