71
7.7 Storage
7.7.1.
Schedule
Before setting up schedule, the user must set the record mode to “Auto” or “Manual”.
Note:
•
If record mode in record control is off, then device will not snapshot according to schedule.
7.7.1.1 Record
Schedule
Record schedule steps:
Step1
Click on the [Record Schedule] tab. See Figure 7-59.
Figure 7-59
Step2
Select each record time for “Monday” through “Sunday”, and click on the [Setup] button on the right. See
Figure 7-60.
•
Set period according to actual need. There are six periods available each day.
•
By checking or unchecking, you can add or delete three types of record schedule: “General”, “Motion”,
and “Alarm”.
Note:
•
Period setup can be done by dragging in the [Record Schedule] interface while not releasing left
mouse.
Figure 7-60