41
Refer to the following sheet for detailed information.
Parameter
Function
Mode
•
When the “Mode” is set as “Auto”, the system will auto adjust the
image definition according to the actual scene.You can select “Low”,
“Middle” and “Hight”.
•
When the “Mode” is set as “Off”, then the defog function is disabled.
7.2.2.8 Default
It is to restore camera parameter to factory default setup.
Figure 7-20
Check each items that need to set factory defaults and click Default button.
7.2.3.
Profile Management
The [Profile Management] interface is shown as in Figure 7-21.
Figure 7-21
