![background image](http://html.mh-extra.com/html/panasonic/wv-sw598/wv-sw598_installation-manual_1511955030.webp)
Connecting to a network using a PoE+ hub when the temperature is –30 °C {–22 °F} or
less
* When connecting to a network using a PoE+ hub when the temperature is –30 °C {–22 °F} or less, use a 24 V AC power
supply or a tested PoE injector.
Hub, router
PC
LAN cable (category 5e or
better, straight)
LAN cable (category 5e or
better, straight)
Tested PoE injector
LAN cable (category 5e or
better, straight)
Video monitor
(for adjustment use only)
Video monitor
(for adjustment use only)
Powered speaker
Powered speaker
Plug-in power type
microphone
Plug-in power type
microphone
Power supply
(24 V AC)
RJ-45 female connector
(cable coupler)
RJ-45 female connector
(cable coupler)
Recommended total extended
cable length*
<Required cable>
LAN cable (category 5e or better, straight)
*
Recommended cable length from the speaker: less than 10 m {32.8 feet}
Recommended cable length from the microphone: less than 1 m {3.28 feet}
IMPORTANT:
• The video monitor is used for checking the adjustment of the angular field of view when installing the camera or when
servicing. It is not provided for recording/monitoring use.
• Depending on the monitor, some characters (camera title, preset ID, etc.) may not be displayed on the screen.
• Use a switching hub or a router which is compliant with 10BASE-T/100BASE-TX or better. (When supplying the power
to a hub or router, apply PoE+ (IEEE802.3at compliant).) It is impossible to supply the power to this product from a
PoE hub or router that is compliant with IEEE802.3af standard.
• If a PoE+ hub is not used, each network camera must be connected to a power supply.
• When using 24 V AC, power supply from a PoE+ hub or router is not required.
30