Step 7
First, insert the tab on the bottom of the main sunshield
rear cover into the main body, and then push the tab on
the top of the main sunshield rear cover into the main
body until a click is heard.
Step 8
Turn on the power of the camera, and select “Use” for
“SD memory card” on the [SD memory card] tab of the
“Basic” page on the setup menu. (
☞
Operating
Instructions (included in the CD-ROM))
Step 9
Format the SD memory card by clicking the [Execute] button
of “Format” on the [SD memory card] tab of the “Basic”
page on the setup menu. (
☞
Operating Instructions (included
in the CD-ROM))
Main sunshield
rear cover
Step 5
Align “
g
” of the water-resistant cap to “OPEN
h
” of the
camera. Then, turn the water-resistant cap toward “
h
LOCK” until the water-resistant cap is secured to the cam-
era.
Step 6
Secure the water-resistant cap with the locking screw.
(Recommended tightening torque: 0.69 N·m {0.51 lbf·ft})
Water-resistant cap
Locking screw
How to remove the SD memory card
IMPORTANT:
• Before removing the SD memory card, make sure to select “Not use” for “SD memory card” on the [SD memory card]
tab of “Basic” page on the setup menu first.
(
☞
Operating Instructions (included in the CD-ROM))
Step 1
Remove the water-resistant cap by following steps 1 - 3
of the “How to insert an SD memory card” section
(
☞
page 18).
Step 2
Push the SD memory card to release the lock. The SD
memory card will come up from the slot.
Step 3
Return the parts to the original state by following steps 5 -
7 of the “How to insert an SD memory card” section
(
☞
page 19).
19
