Step 7
Fix the front and rear sunshields on the camera using the
front/rear sunshield fixing screw (accessory).
(Recommended tightening torque: 0.72 N·m {0.53 lbf·ft})
Front/rear sunshields fixing screw
Note:
• When removing the front and rear sunshields, perform
steps 5 - 7 in the reverse order. (
☞
Pages 24 and 25)
Step 8
After the installation is completed, remove the tape
wrapped around the camera while holding the Protection
Cover, and then take off the Protection Cover.
Tape
Camera
Dome cover
Protection Cover
25