Installations/Connections
Caution:
• FOR UL LISTED MODEL(S), ONLY CONNECT 24 V AC CLASS 2 POWER SUPPLY (UL 1310/CSA 223) or LIMITED
POWER SOURCE (IEC/EN/UL/CSA 60950-1).
Before installation, prepare the following
• When mounting this camera to a ceiling, mount it using a custom-made ceiling mount bracket and the attachment
pipe (accessory). Refer to page 22 for the specifications of the custom-made ceiling mount bracket.
• When mounting the camera to a wall, use the wall mount bracket WV-Q122 (option).
* When using the wall mount bracket (WV-Q122), do not use the attachment pipe (accessory), use the 4 hexagon screws
(M6) removed from the attachment pipe (accessory) and directly fix the housing base to the wall mount bracket.
* If you do not use the wall mount bracket (WV-Q122) and instead use a custom-made wall mount bracket, follow the
above directions for the ceiling mount bracket and mount the camera using the attachment pipe (accessory).
Refer to the installation guide of the bracket to be used for details on the installation procedures of the bracket and the
camera.
IMPORTANT:
• When using the wall mount bracket (WV-Q122), the hexagon screws (M6) that are accessories of the wall mount
bracket cannot be used as the mounting screws for this camera. Use the hexagon screws (M5) attached to the hous-
ing base.
• When using a custom-made mount bracket, use screws and anchors that are capable of supporting the combined
weight of the camera (approx. 5 k
g
{11.02 lbs}) and the mount bracket.
• When using the wall mount bracket (WV-Q122), use 4 M8 size screws that have a pull-out capacity of at least 823 N
{185 lbf}.
• Select screws and anchors that match the type of wall or ceiling that the camera will be mounted to.
Wall mount bracket WV-Q122
Attachment pipe
20
