Insert/remove an SD memory card
How to insert an SD memory card
IMPORTANT:
• When inserting an SD memory card, make sure the direction.
Step 1
Pull out the main sunshield rear cover on the rear of the
camera by pressing the tab on the top of the sunshield.
Step 2
Remove the locking screw of the water-resistant cap.
Step 3
Turn the water-resistant cap to the “OPEN” side, and pull
out the cap.
Step 4
Insert an SD memory card into the SD memory card slot.
Push the memory card straight into the slot until a click is
heard.
START
INITIAL SET
OFF ON LINK ACT
SD
SD memory card slot
Main sunshield
rear cover
Water-resistant cap
Locking screw
18