74
Configure the settings relating to the priority stream [System]
Click the [System] tab on the "User mng." page. (
☞
Pages 22 and 23: How to display/operate the setup menu)
The description below is the configuration of the priority stream that can transmit images without deteriorating the
image quality and refresh interval even when multiple users access concurrently.
■
Priority stream
[Activation]
Select "On" or "Off" to determine whether or not to use
the priority stream.
Default:
Off
Note:
• When "On" is selected for "Activation" of "Priority
stream", number of users who can access the cam-
era will be limited.
[Destination IP address(1)]
Enter the first destination IP address.
[Destination IP address(2)]
Enter the second destination IP address.
[Stream type]
Select either "JPEG", "H.264/MPEG-4(1)" or "H.264/
MPEG-4(2)".
JPEG:
JPEG images will be transmitted.
H.264/MPEG-4(1):
H.264 (1) (or MPEG-4(1)) images will
be transmitted.
H.264/MPEG-4(2):
H.264 (2) (or MPEG-4(2)) images will
be transmitted.
Default:
JPEG
Note:
• When "H.264" is selected for "Recording format", it
is impossible to transmit H.264 (2) images.
In this case, "H.264/MPEG-4(2)" is invalidated.
[Refresh interval*]
Select the refresh interval from the following.
This setting is validated only when "JPEG" is selected
for "Stream type".
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps/ 2fps/ 3fps/ 5fps/
6fps*/ 10fps*/ 12fps (PAL models)*/ 15fps*/ 30fps*
Default:
1fps
Note:
• When "On" is selected for "H.264 (or MPEG-4)
transmission", the transmission interval may be lon-
ger than the set value when any value with an aster-
isk (*) on the right is selected.
[Image capture size]
Select the image capture size from the following.
This setting is validated only when "JPEG" is selected
for "Stream type".
When "4:3" is selected for "Aspect ratio"
QVGA/ VGA/ 1280x960*
1
QVGA/ VGA/ 800x600*
2
When "16:9" is selected for "Aspect ratio"
320x180/ 640x360/ 1280x720*
1
320x180/ 640x360*
2
Default:
1280x960*
1
VGA*
2
*1
SP306
SP305
SF336
SF335
*2
SP302
SF332
