manualshive.com logo in svg
background image

- 2 -

PREFACE

Panasonic presents highly advanced CCVE techno-
logy to meet the demand of new and ever-changing
applications. The WV-CS400 is unitized colour video
surveillance device which features 1/3" CCD Digital
Signal Processing (DSP) high performance camera,
pan/tilt mechanism, 10 times zoom lens and
receiver in its compact enclosure.
The camera portion incorporates 1/3" high sensitive
CCD and provides 480-line horizontal resolution
and 48 dB of S/N ratio. Also WV-CS400 feature
advanced digital signal processing circuit which
enables a surveillance of the next age.
Pan & tilt portion is especially designed to meet
your specific needs.
WV-CS400 features 360 degree endless panning. A
unitized surveillance devices, Panasonic WV-CS400
give you the edge of high technology of advanced
video surveillance.

FEATURES

1. Maximum 24 degree/sec. speed for automatic

and manual panning.

2. 360 degree endless panning.
3. The following functions are built in.

(1) Auto Light Control (ALC)/Manual Override

Iris

(2) Character Generator
(3) Back Light Compensation (Auto: Factory

preset, Manual: Manual photometric
measuring area set)

(4) Auto/Manual White Balance Function
(5) Electronic Shutter Function

4. Signal-to-noise ratio of 48 dB
5. Minimum illumination of 3 lx
6. 480 lines of horizontal resolution
7. High quality picture:

(a) 2H type vertical enhancer for greater

picture sharpness

(b) Chroma averaging circuit for better colour

signal to noise ratio

(c) Minimum of aliasing on fine objects

(d) Expanded dynamic range by use of knee

circuit

(e) Highlight aperture correction for greater

picture detail of bright object

8. Back Light Compensation for use against

unusual lighting conditions.

PRECAUTIONS

• Do not attempt to disassemble this unit. There

are no user serviceable parts inside. Refer
servicing to qualified service personnel.

• This unit is designed for indoor use. So mount

this any other place which allows to avoid the
rain or moisture.

• Be sure to mount on flat ceiling.
• Do not drop the metalic parts through slots.

This action could permanently damage this
unit. Do turn the power off immediately and
refer servicing to qualified service personnel.

• Wipe the enclose regularly by using a soft and

dry cloth, or a cloth moistened with a solution of
water and normal kitchen detergent.
Do not use chemicals for cleaning the
enclosure as it may damage the surface.

• Every necessary procedures with regard to

install this product should be made by qualified
service personnel or system installers.

• Use this unit in an environment where the

temperatures is within 

10°C - +50°C (14°F -

122°F), and the relative humidity within 90%.

• Never aim the camera at bright objects.

Whether the camera is in use or not, never aim
it at the sun, or other extremely bright objects
as this could cause blooming.

• Do not mount this unit except the ceiling mount.

The standing mount makes the picture upside
down, and the movement of the panning and
tilting to reverse.

Содержание WV-CS400






























Отзывы: