Panasonic WH-MDF12C6E5, Руководство по обслуживанию

Страница: 37 / 121

37
11.4.1 Wire Stripping And Connecting Requirement
11.4.2 Connecting Requirement
The equipment’s power supply 1 complies with IEC/EN 61000-3-12 provided that the short-circuit power S
sc
is
greater than or equal to (Refer below table) at the interface point between the user’s supply and the public
system. It is the responsibility of the installer or user of the equipment to ensure, by consultation with the
distribution network operator if necessary, that the equipment is connected only to a supply with a short-circuit
power S
sc
greater than or equal to . (Refer below table)
The equipment’s power supply 1 shall be connected to a suitable supply network, having service current capacity
≥ 100A per phase. Please liaise with supply authority to ensure that the service current capacity at the interface
point is sufficient for the installation of the equipment.
The equipment’s power supply 2 complies with IEC/EN 61000-3-12.
The equipment’s power supply 2 shall be connected to a suitable supply network, with the following maximum
permissible system impedance Z
max
= 0.236 Ω at the interface.
Please liaise with supply authority to ensure that the power supply 2 is connected only to a supply of that
impedance or less.
For power supply 3: (Only applicable for model 12kW,14kW and 16kW)
The equipment’s power supply 3 complies with IEC/EN 61000-3-12.
The equipment’s power supply 3 shall be connected to a suitable supply network, with the following
maximum permissible system impedance Z
max
=0.464 Ω at the interface.
Please liaise with supply authority to ensure that the power supply 3 is connected only to a supply of that
impedance or less.
type series
1 WH-MD*E5* 858kW
2 WH-MX*E5* 817.85kW